We make it easy for you to buy from AtomicHobbies.com!

1. Add the items you want to your Shopping Cart,
2. Confirm your order, and
3. Proceed to Checkout.

Safety in using Lithium Polymer cells or packs is your first priority. If you cannot comply with the safe handling of Lithium Polymer cells or assemblies then do not use them. If you do not understand the characteristics of Lithium Polymer cells or assemblies then do not use them. Please be sure to read and follow these instructions carefully as injury can occur if requirements are not followed. Safe Charging Lithium Polymer cells have very strict charging requirements. Always charge Lithium Polymer cells or packs with recommended LITHIUM POLYMER SAFE CHARGER or great damage may occur. Always test your charger to assure it is functioning properly. Always charge your Lithium Polymer cells or packs outdoors and in a fire proof container. Always store Lithium Polymer battery packs in a fire proof container. Always have sand or dry fire extinguisher nearby in the event of fire. Always keep any batteries out of the reach of children and handle Lithium Polymer cells and packs with great care. Always purchase a factory authorized built pack instead of building your own. Always observe the correct polarity when connecting cells or packs to charger or application. Always seek medical attention if electrolyte gets in your eyes (flush with cold water immediately). Always scrub with soap and water if electrolyte comes in contact with your skin. Never charge Lithium Polymer cells or packs unattended. Never charge Lithium Polymer beyond factory specifications; this is strictly prohibited. Never charge Lithium Polymer batteries in your car, home or garage or where other physical damage can occur. Never charge Lithium Polymer batteries while in the model as the hot pack may ignite certain materials. Never charge Lithium Polymer batteries on flammable materials such as wood, foam or plastic. Never extinguish a Lithium Polymer battery fire with water. Never disassemble a Lithium Polymer cell or pack (see damaged notes below). Never short circuit Lithium Polymer cells or packs. Never use a Lithium Polymer cell or pack that has been damaged (see damaged notes below). Never put loose cells with uncovered terminals in your pocket, purse, bag, desk drawer, etc. Never expose cells or packs to temperatures that exceed 60C/140F. Never exceed the manufacturer recommended maximum discharge rates. Never combine different cell sizes or capacities together in the same pack. Never unplug battery from LITHIUM POLYMER SAFE CHARGER while charging (unplug charger before disconnecting battery). Damaged cells or packs Inspect the cells, wire leads and connections for possible short circuit. If there is any doubt completely cut all wires from the cells and pack. Cut one wire at a time to avoid a short circuit. If any cells are dented or deformed in any way, discontinue its use immediately. Follow disposal notes below. Disposal of cells or packs Discharge all cells individually to recommended cut-off voltage of 3.0 volts per cell. Caution!! Cells may be warm or hot as usual during this discharge process. After cooling, puncture small hole in cells and immerse in salt water overnight. Apply tape over both terminals and dispose of in trash. As with any standard chemicals you use or store around work or home, follow all safety directions to prevent accidents or damage to persons or property. Safety must be your first priority when using Lithium Polymer cells or packs. Educate yourself and your friends to implement safe handling and usage of all Lithium Polymer Batteries. Proper Application of Lithium Polymer Batteries The use of Lithium Polymer Batteries sold by Atomic Hobbies is strictly for radio controlled models ONLY! Use in any other application is not permitted as it may cause serious personal injury or property damage. In purchasing and/or using Lithium Polymer Batteries from Atomic Hobbies the buyer/user, agrees to accept all responsibilities all risks involved and agrees not to hold Atomic Hobbies, the manufacturer and/or its distributors (owners and employees) responsible for any accidents, injury to persons, or damage to property. Since many radio controlled applications exceed the manufacturer's recommended maximum discharge rates there is no warranty (expressed or implied) by the manufacturer, its distributors and/or retailers in respect to the cycle life, capacity, cell characteristics or storage life of cells and packs used in the radio controlled models.

Manufacturer Support Info:

Thunder Power Batteries 4720 W. University Ave. Las Vegas, NV, 89103, USA Phone: (1) 702-228-8883 Fax: (1) 702-228-8885 E-mail: info@thunderpower-batteries.com

Click here for Thunder Power's safety guidelines.